You end up with a frame sitting true in a wall that is not, a reveal with no taper in it, and the inside finished by the people who made the hole.
What This Article Covers
- The reveal, the lintel and the cill are surveyed before anything is ordered.
- The perimeter gap is insulated and sealed on both faces, which is where the draught actually comes from.
- Timber takes a factory finish, because a finish applied on site never cures the same on this coast.
- A sound sash box frame is repaired rather than replaced, with new cords, pulleys, weights and brush seals.
- Supplied units get fitted, and the openings are surveyed before anything is delivered.
George Herkes & Son Joinery has worked across East Lothian since 1989, holds East Lothian Trading Standards Trusted Trader accreditation and is rated 5.0 from 62 reviews, and the team behind a kitchen refurbishment in Cockenzie & Port Seton fits and finishes the windows.
Ring George before you order anything and he will come and measure the openings.
Window Installation and Replacement
The problem with a window quote is that most of it describes the unit and almost none of it describes the opening. The unit is a product anybody can buy. The opening is the job.
What you end up with is a frame sitting true in a wall that is not, a reveal with no taper in it, and the inside finished by the people who made the hole. The reveal, the lintel and the cill are surveyed before anything is ordered. Frames are packed and shimmed rather than forced. The perimeter gap is insulated and sealed on both faces. Making good is ours. Nothing is left for another trade to come back for.
Planning Window Fitters in Cockenzie & Port Seton? Get a free quote from George Herkes & Son Joinery and find out what it takes.
Materials, Security and Finish Options in Cockenzie & Port Seton
The awkward part here is that a harbour elevation and a 1980s estate elevation want different things, and a single specification serves neither.
Timber and finish
Timber suits the older stone built stock and takes a factory finish before it arrives. A finish applied on site never cures the same, and on this coast that shows within a couple of winters.
Ironmongery and security
Ironmongery is chosen for sash weight and for exposure. A multipoint lock is only as good as the keep it engages and the frame that keep is fixed into, so frame reinforcement matters as much as the cylinder. That is the same specification discipline behind garage conversion designs in Cockenzie & Port Seton.
Want a price for Window Fitters in Cockenzie & Port Seton? Ask George Herkes & Son Joinery for a free quote.
Double Glazing and Energy Efficiency for Cockenzie & Port Seton Homes
Sealed units handle heat. The draught you actually feel comes round the frame rather than through the glass, and on this coast it comes hard.
Sealing the perimeter
The gap between frame and masonry is insulated and sealed on both faces. Skip that and the most expensive unit available still feels cold in a wind off the Forth.
Older openings
Where a sash is being kept, slim profile units can go into a refurbished box frame, though not in every case. Trickle ventilation is specified where it is needed rather than left out to make a quote look tidier. The same care runs a job for who does bathroom installation in Cockenzie & Port Seton.
Casement, Flush and Heritage Window Options
Style is where people expect the decision to sit, and the elevation has usually made it already.
A flush casement sits in the plane of the reveal and suits older stone. A stormproof casement stands proud and suits the later stock that went up from the 1970s onward. Sightlines, glazing bar widths and cill projections are taken off the existing frames as dimensions before anything is ordered, so a new unit does not announce itself on an elevation that has already been done in stages. Same approach as window replacement in Prestonpans.
Sash Window Repair and Restoration
The failure here is replacing a sash that did not need replacing, which is the more expensive mistake and the more common one.
Cords, pulleys and weights are all replaceable. A rotten cill section can be spliced rather than the whole frame coming out. Brush seals in the staff and parting beads make more difference to draughts than people expect. A box frame that is sound does not need to come out for the sake of it. It is all doors and windows work and it is quoted honestly: repair first, replace where it is genuinely past it.
Doors, Conservatories and Related Glazing
Glazed doors and the windows in the same elevation have to agree, and on a house extended in stages they rarely do.
Thresholds on external doors need to drain rather than only seal, which on an exposed coastal elevation is the difference between a lasting job and a callback in two winters. Conservatory and lean-to roof junctions get flashed rather than filled with mastic. Glazing within a defined distance of floor level has to be toughened or laminated, and that is checked against the leaf rather than assumed from its appearance.
Installation Only and Trade Subcontracting
Plenty of people have already bought their windows and need them in properly. That is a normal call.
Supplied units get fitted, and the openings get surveyed first so a wrong size is somebody’s problem while it can still be changed rather than on the day. Fitting work is taken for builders and other joiners on the same terms. The standard does not move depending on who is paying for it. Where a supplied unit turns out to be the wrong size, the options are stated plainly rather than worked around with packers and mastic, because a frame packed out beyond its tolerance will not stay square.
Want a price for Window Fitters in Cockenzie & Port Seton? Ask George Herkes & Son Joinery for a free quote.
Window Fitters in Cockenzie & Port Seton FAQs
Do you work on the older harbour properties here?
Regularly, and they need a different approach from the later estates. Sightlines, glazing bar widths and cill projections come off the existing frames as dimensions so a new unit does not announce itself on the elevation.
Can my sash windows be repaired instead of replaced?
Often yes. Cords, pulleys and weights are replaceable, a rotten cill section can be spliced, and a sound box frame does not need to come out for the sake of it. We will tell you which of yours fall on each side of that line.
Will you fit windows I have bought myself?
Yes, and the openings get surveyed first. If the sizes are wrong you will hear it while it can still be changed rather than on fitting day.
What about the mess and the making good?
Making good is ours. The internal facings, the window boards and the plaster line are finished by the same people who fitted the frame, so nothing is left for another trade.
Does the sea air make a difference to the specification?
A real one. Ironmongery is chosen for exposure rather than for looks, and timber takes a factory finish before it arrives, because a finish applied on site does not cure the same here.
Do I need planning permission to replace windows?
Usually not for a like for like replacement, but it depends on the property. It is checked against your address before you commit rather than afterwards.
